sophos xg firewall traffic shaping by ip its possible?

Question

I have ip ranges or groups like 
 192.168.110.1-10 | Group A | Can use facebook | 20mb down, 5mb up 
 192.168.110.11-254 | Group B | No service | 0mb down, 0mb up 
 192.168.111.1-254 | Group C | Service without social networks | 10mb down, 2mb up 
 (this groups are for test and examples) 
 So, thats what i want to make, actually the rules for deny or not the service are ready, but im trying now how to set up the traffic shaping, but i dont know how to make it possible, right now, i have seen this, but it doesnt work, it let me surface to any speed that has my router. 
 
 (this rule is only for the ips 192.168.111.1-254)

Thanks for all the help :)

sachingurung · Answer

Hi Mike, 
 This setup is possible, you need to configure separate FW-rule for each range of IP address and define explicit Web and Application Filter along with QoS(traffic shaping) associated with it. 
 Suppose, FW-rule: LAN(x.x.x.x) >ANY> WAN > WEB/APP Filter (traffic shapping applied) 
 Refer the link here, you will get a brief idea over this: community.sophos.com/.../123062 
 Thanks

Billybob · Answer

Mike, QoS in XG is really good. What I immediately see as a problem is that you are defining too much bandwidth. The QoS bandwidth is defined in KB as in KILOBYTES and not kb as in kilobits. So to throttle 
 20 megabit/s define 2500KB/s and not 20000 
 5 megabit/s define 625KB/s and not 5000 
 There have been a few feature requests to change everything into kb (kilobits) like it should be, lets see if they fix it in v17.