Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 4652 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG - Home - Unable to communicate between devices connected to two different LAN Ports

Prakash Ramachandran

I'm setting up a Sophos XG Home Edition FW on a 4 Port device.  I have configured two of the Lan Ports(Port1 and Port 3) in a Bridge mode.  I have an AirPort Wireless Router connected to Port 1 and I have a Switch Connected to Port 3, and i have a NAS Connected to the Switch in addition to a few other devices on the switch.  All these Devices seem to be able to communicate out to the internet. 

The issue is, the devices connected to my AirPort (LAN 1 Port) are unable to connect to the NAS Device or any other device connected to the switch on Lan 3 port.  They are all setup to be in the same subnet, and i do have a LAN-LAN rule setup as well.   Not sure what i'm missing here, any help would be appreciated.

 

 

 



This thread was automatically locked due to age.
  • 0

    Hi Prakash,

    The LAN-LAN rule has no traffic passing through it which can be concluded looking on the top right corner of the FW-RULE which says in 0B, out 0B. Also, show us an inside picture of the fw-rule and uncheck the match known user option. Later, check #1 in my guide here and post the output for drop-packet-capture and packet capture.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Unfiltered HTML