Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 40 subscribers
  • Views 226 views
  • Users 0 members are here
Options
Suggested

xg firewall rule for nvr

SATPAL BHATIA

Dear Team,

How to configure NVR rule on firewall. So that I can access the cameras  through static IP  from anywhere.

Regards,

Satpal.



Removed Contact Information and added TAGs
[edited by: Erick Jan at 4:59 AM (GMT -8) on 5 Dec 2024]
Parents
  • 0

    HI,

    normally the cameras are connected to an external server (camera supplier) which allows remote access.

    Assumption, the static IP is on the external interface of the XG? 

    You will need a firewall rule WAN, any, LAN, IP address of your camera, service , allow, log. You will need to create a DNAT rule to allow the incoming traffic through the firewall.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    HI,

    normally the cameras are connected to an external server (camera supplier) which allows remote access.

    Assumption, the static IP is on the external interface of the XG? 

    You will need a firewall rule WAN, any, LAN, IP address of your camera, service , allow, log. You will need to create a DNAT rule to allow the incoming traffic through the firewall.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML