How to block youtube for a particular IP range in Sophos XG

Hi, You will need two rules, one with allow time and the other with block time. You will need to make sure that the ip address range does not appear in any other firewall rules.

Thanks rfcat_vk , will try and let know 

how about blocking youtube for this ip range at all times , would that be achieved as well with these rules ?

Sorry Ian , I missed a bit 

Cable from NBN box connects to WAN port of Tplink router and from LAN port of Tplink connects to Port 2 of Minipc which has Sophos XG installed on , which is why I believe Port 2 is getting 192.168.1  address

Sorry about the muck up 

Try plugging the XG directly into the NBN box, not using the TP-link.

Ian

Morning Ian ,

Sophos box does not pick up , which is why I had to use the tp-link

You need to check the settings in the to-link because tpg I believe use VLANs.

ian

Thanks Ian , will check on it

If its VLAN , please advise what i should be checking with TPG to change it to

Else i can shop for other ISP who provides the requirement

Appreciate your assistance

TPG will not change their connection method, I use Aussie BB, they don't use any special connection methods. I suggest you check the whirlpool forums for advice on other ISP/RSPs.

Ian

Thanks Ian , will do , appreciate your help mate

Hi Ian,

Are you referring to such a setup 



Does all NBN NCD support this ? 

If i was to contact TPG , please advise what requirement should i be querying

Appreciate any tips

Thanks

Do search for TPG fttp configuration requirements.

Ian

As far as I can see, just plug the XG into port1 of the NBN box and wait for about 30 minutes after you have configured the XG for DHCP.

Ian

As far as I can see, just plug the XG into port1 of the NBN box and wait for about 30 minutes after you have configured the XG for DHCP.

Ian