Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 1061 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unabel to NAT Remote access VPN IP to internal network IP

Werner Smit

Good Day,

Am trying to NAT our Remote Access VPN IPs to internal network IP's without making any changes to the Remote Access VPN.

I can change the IP assigned by Remote Access to the users when connecting to the Sophos VPN but don't want to change the current config. 

Want to NAT 10.81.234.x/24 (this IP is assigned to the users connecting through sophos connect) and NAT it to 10.0.60.x/24 (Internal Subnet to assign for the users) 

Tried the following below:

Original Source: VPN Pool(IPSec & SSL) 10.81.234.x/24

Original Dest: VPN-Test 10.0.60.x/24



This thread was automatically locked due to age.
  • 0

    Have the same problem. Am using Sophos XG FW for 5 yrs+ and have never been able to setup SSL VPN and connect to the internal network resources.

     
    SFVH (SFOS 20.0.0 GA-Build222) - Last (re)boot on November 6th  2023
    Asus H410i-plus - Pentium 6605 Gold - 250GB M.2 PCIe NVMe SSD - 8GB - 3 ports
    [If any of my posts are helpful to you please use the 'Verify Answer' link]
Unfiltered HTML