Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1737 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SFOS SW Installer 19.5.3.652 failed to Boot ISO on Dell PowerEgde R350 & R640

SR-M

Dear Community Member,

during the task to refresh our firewall Hardware, we try to install SW-19.5.3_MR-3-652.iso on Dell PowerEdge R350 but it fails, mount iso over idrac stuck at ISO boot without any output.
Secound try was to make USB Boot Stick using RUFUS fails again without any output.

Next try on Dell PowerEdge R640 using the formaly created USB-Stick with small success of booting into GRUB Bootloader Version 2.02 ended up into unexpected server reboot.
The Dell PowerEdge R640 Hardware works fine with current GRUB Version 2.06 with comes with Ubuntu version 20.04.

Any Solutions?

Best Regards

Sirko



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    past users who have tried using Dell have e need up installing a VM then installing the XG on that.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi,

    past users who have tried using Dell have e need up installing a VM then installing the XG on that.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML