Ipsec site to site connection

Question

im having the problem with ipsec to a client with cisco firewall. The firewall cannot connect to the remote site but the policies and the satting are the same. This is how my setup is 
 Local Public ip : 154.120.225.2 
 Local ID : set as the Public ip 
 Local subnet : 10.7.218.128/27 
 
 Remote Public ip: 41.190.38.171 
 Remote ID: 
 Remote subnets:10.1.1.0, 10.2.218.0

Erick Jan · Answer

Hi Saviour, 
 Thank you for reaching out to Sophos Community. 
 Have you tried to use any how-to videos, documentation, Sophos Assistant, or KBA to try to check the issue? 
 Kindly share any logs (strongswan) that might assist us in troubleshooting. 
 Kindly refer to the following KB which might assist, and also do a packet capture. 
 
 Troubleshooting site-to-site IPsec VPN 
 Sophos Firewall: Configure IPSec between the firewall and Cisco ASA

Ipsec site to site connection

Top Replies