Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 1598 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XGS 136W - Trouble Removing Wireless Virtual Interfaces

Allen K

Hello,

I'm currently working on an issue with a XGS 136W and an APX 320.  When creating a wireless network, a new virtual adaptor gets created.  All fine.  However, I've noticed a difference between the XGS side and the APX side.  When removing a wireless network from the APX, the clean-up works as intended.  When removing a wireless network from the XGS side, a disconnected virtual adaptor remains.  I haven't found a way to remove them and they can't be reused.  If you build a new wireless network, it will force you to create a new wireless adaptor for it due to the hardware device name conflict.  Any suggestions for removing these old adaptors?  Running 19.5.2.



This thread was automatically locked due to age.
  • +1

    Hi Allen K

    Please go to Protect-->Wireless-->Wireless Networks, delete wlnet5

    Check DHCP config:
    psql -U nobody -d corporate -c "select * from tbldhcpconf ;"

    Check all interfaces:
    psql -U nobody -d corporate -c "select * from tblinterface;"

    Delete the interface:
    psql -U nobody -d corporate -c "delete from tblinterface where interface=['InterfaceName']; "

    Regards

    "Sophos Partner: Networkkings Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Bharat J

    This did it for me.

     psql -U nobody -d corporate -c "DELETE FROM tblinterface WHERE interface = 'GuestAP';"

    Ran this from serial using the advanced console.  Thank you Bharat!!

Unfiltered HTML