This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN ping devices with no gateway?

Hi,

while connecting remotly throught a VPN SSL and reaching LAN, I can only ping and reach devices with default gateway configured. (no DHCP running, only static addresses)

There's a way to solve this without configuring gateway or placing a router between device and main switch?

Thankyou in advance for any suggestion

This thread was automatically locked due to age.

Top Replies

FFin over 1 year ago +2 suggested

You might use SNAT-Rule (or MASQ) in this case. So traffic will come from Sophos Interface IP in that network and no gateway will be needed, as devices respond to host/ip in same subnet.

Parents

0 Alok over 1 year ago

Hi,

it's not clear.

Can you provide more context or pkt flow to understand the requirement?

-Alok
Cancel
Vote Up +1 Vote Down

Cancel
0 redchat2435 over 1 year ago in reply to Alok

Hi,

the envrioment is a production plant with different PLC's connected into the same network, everyone has a static IP address and in some of these is not possibile to configure a gateway in IP settings. So I'm unable to reach throught remote ssl vpn the one without gw configured.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 redchat2435 over 1 year ago in reply to Alok

Hi,

the envrioment is a production plant with different PLC's connected into the same network, everyone has a static IP address and in some of these is not possibile to configure a gateway in IP settings. So I'm unable to reach throught remote ssl vpn the one without gw configured.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data