Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 37 subscribers
  • Views 992 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC Sophos XG 18.5 (Nat configuration from tunnel)

Boune

Hello,

I got a IPSEC VPN from my sophos xg to remote firewall. 

Many subnet from my side are nated dynamiclaly with 172.30.10.0/24 to reach different subnet  on the other side. Like (192.168.1.0/24 , 192.168.2.0/24 ...are nated with 172.30.10.0/24 to go through the tunnel ) its work like a charm right now.

I have 1 server who must be accessible from the other side to my side, so i try to create a nat rule who translate traffic from 172.30.10.200 (for exemple) to one of my server in my subnet like 192.168.1.200.

I try some nat rules but it doesnt work. Any Idea how to create a DNAT from IpsecVPN?

Regards,



This thread was automatically locked due to age.
Unfiltered HTML