Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 2255 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

M.2 NVME drive support on SFVH (SFOS 19.5.1 MR-1-Build278)

Rick Dunn

I have been running SFOS on fanless i7 hardware with spinning disk for a year or so .. My hardware supports NVME drives ... is it possible to install this on an NVME drive yet so that I can remove the old spinning drive from the hardware? I got past the UEFI boot using a legacy BIOS setting ... trying to get rid of this old spinning disk now.



This thread was automatically locked due to age.
Parents
  • 0

    Sure, see my footer below.

     
    SFVH (SFOS 20.0.0 GA-Build222) - Last (re)boot on November 6th  2023
    Asus H410i-plus - Pentium 6605 Gold - 250GB M.2 PCIe NVMe SSD - 8GB - 3 ports
    [If any of my posts are helpful to you please use the 'Verify Answer' link]
Reply
  • 0

    Sure, see my footer below.

     
    SFVH (SFOS 20.0.0 GA-Build222) - Last (re)boot on November 6th  2023
    Asus H410i-plus - Pentium 6605 Gold - 250GB M.2 PCIe NVMe SSD - 8GB - 3 ports
    [If any of my posts are helpful to you please use the 'Verify Answer' link]
Children
No Data
Unfiltered HTML