Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 76 replies
  • Answers 4 answers
  • Subscribers 67 subscribers
  • Views 30146 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Firewall: v19.5 MR1: Feedback and experiences

LuCar Toni

Release Post:   Sophos Firewall OS v19.5 MR1 is Now Available 

The old V19.5 GA Thread:  Sophos Firewall: v19.5 GA: Feedback and experiences 



Removed Prio.
[gesperrt von: LuCar Toni um 11:37 AM (GMT -7) am 9 May 2023]
Parents
  • 0

    Same problem as other Users with the HA.

    At one customer a HA pair of XGS2100 just hung up, so WebGUI was unresponsive.

    Reboot over the display was not possible, after unplugging the devices took about 20min for the boot to be completed.

    An other customer has 2 died XGS2100 after the update to 19.5 MR1, one died directly after the update, the other a few days later.

    Both firewalls have problems with the disk an had to be replaced by Sophos (fortunately they were quickly replaced).

  • 0 in reply to ThomasBauer

    Hello Thomas,

    Thank you for contacting the Sophos Community.

    Sorry to hear about the issue you had.

    Can you share the Case IDs you opened with support for the issues you mentioned.

    Regards,

     
    Emmanuel (EmmoSophos)
    Technical Team Lead, Global Community Support
    Sophos Support Videos | Product Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.
Reply Children
  • 0 in reply to emmosophos

    For the first customer we don't create cases because the reboot of the HA cluster did the trick.

    For the second customer we had created the following cases:

    Case #06334422 and #06365999

    Both firewalls had to be replaced due to hard disk problems after the update to 19.5 MR1.

    Also the rebuild of the HA was not easy, I had problems that after the rebuild several interfaces were not accessible. (which took about 10 min including some ping losses)

    Only a failover to the auxillery firewall has solved the problem.

    We are now monitoring the firewalls, the customer is unfortunately a bit pissed off.

Unfiltered HTML