This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG330 LCD not working with SFOS 19.0.1 MR-1

Hi there,

I'm using a Sophos SG330 Rev.1 with the SFOS Home 19.0.1 MR-1 and the LCD is only showing "Sophos Protection". Is it possible to use the LCD properly?



This thread was automatically locked due to age.
Parents
  • Hi,

    the software version does not support the LCD displays. From memory there are some very old threads on how to enable the display, but the changes get overwritten at each upgrade.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi,

    the software version does not support the LCD displays. From memory there are some very old threads on how to enable the display, but the changes get overwritten at each upgrade.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Children