Reflexion will be End-of-life on March 31,2023. See Sophos Reflexion EoL FAQs to learn more.
Hi,
I'm new with this equipments, i'm trying to configure VLANS between two equipments (SOPHOS -» Switch)
SOPHOS:
- WAN - DHCP from ISP router
- LAN PORT1
IP: 192.168.100.1/24 - ZONE LAN
1.10 - VLAN 10 - 192.168.10.1/24 - PORT 1 - ZONE LAN
1.20 - VLAN 20 - 192.168.20.1/24 - PORT 1 - ZONE LAN
Have DHCP configured for the physical port and each vlan.
The firewall is configured to allow any traffic for ZONE LAN
On the switch side:
Configured port 8 (connected to sophos PORT1) as trunk tagged
port 1 as vlan 10 untagged
port 2 as vlan 20 untagged
I cant get DHCP on the switchports 1 and 2 but if i configure manually ip address on the computers NIC i can ping the vlan respective vlan gateway (ex: 192.168.10.1) and have access the internet.
I'm missing any configuration as i'm using router on a stick?
do you have port 8 as tagged for both VLANs?ian
XG115W - v19.5.1 mr-1 - Home
If a post solves your question please use the 'Verify Answer' button.
Yes i do. Both switchports (port 1 - vlan 10 and port 2 - vlan 20) have the same issue, work with the respective vlan only if i set manual ips on the computers nic. I cant get dhcp for that ports/vlans.
The other ports arent in use.
Edit: on the firewall side i dont see any option to tag the vlan. I have the VID so im assuming the firewall is doing it by default
the XG creates the VID when you create your VLANs. Does your switch support L3 VLANs, though this shouldn't be an issue with v19.x and you do not need an addressor the physical port.
Ian
My switch is an aruban instant on 1930 8port JL680A.
For this configuration is requires l3?