This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG135 Home Registration

Hello World,

I purchased a used XG135 online and it's currently registered to another company.

I did a fresh install and their information is still showing up.

I'm looking to apply the Home Edition Firewall License like I had running on my old PC. I'm only using this for a lab but I'd like to be able to use all the functionality in the device under my own Home License.

Can anyone tell me how do I re-license this device with my Home LIcense?

Thanks for all responses.

This thread was automatically locked due to age.

Top Replies

rfcat_vk over 1 year ago in reply to BobbyDigital +2 suggested

Replace the disk or totally format the disk. Ian

Parents

+1 kranthi yadlapudi over 1 year ago

I would suggest re-imaging the firewall with a software ISO and NOT a hardware ISO and then use the home license serial number
Cancel
Vote Up +1 Vote Down

Cancel
0 BobbyDigital over 1 year ago in reply to kranthi yadlapudi

Hello,

When I tried installing the software ISO it gave me an error and wouldn't allow me to install. Is there a way around this?
Cancel
Vote Up 0 Vote Down

Cancel
+1 BobbyDigital over 1 year ago in reply to BobbyDigital

Through trial and error I figured it out and got it working.

Again, thanks for all responses.
Cancel
Vote Up +1 Vote Down

Cancel
0 Tabson over 1 year ago in reply to BobbyDigital

What did u do? do u have any tutorial?
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 1 year ago in reply to BobbyDigital

Replace the disk or totally format the disk.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up +2 Vote Down

Cancel
0 Tabson over 1 year ago in reply to rfcat_vk

Thank u for the response;

I've managed to install SW.iso on XG 135, but right now i have Problem with LAN links.

Only 2 out off 9 are seems to be working.

LAN 1 port is now LAN 5 and WAN is LAN 6.
The others LAN have no link at all.

what can i do? i need minimum 4 LANs for my 4 rooms in my home setup.
Cancel
Vote Up 0 Vote Down

Cancel
0 BobbyDigital over 1 year ago in reply to Tabson

Tabson

All of your LAN links are working. But you are correct, they are now backwards and if you need to restore from a backup for whatever reason they will change again from my experience. You will need to take the time to map them out to see what links in the GUI are actually mapped to the link numbers on the XG135 appliance. It only took me about 5mins but it was weird at first.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 1 year ago in reply to Tabson

Try plugging a live cable into each port, one at a time, wait for about a minute to see if it comes alive.

then look at the gui to see which port it is.

ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 rfcat_vk over 1 year ago in reply to Tabson

Try plugging a live cable into each port, one at a time, wait for about a minute to see if it comes alive.

then look at the gui to see which port it is.

ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Jacob Roycer over 1 year ago in reply to rfcat_vk

Thanks for your reply!

I have already tried your method but there are still dead. No link or whatsoever.

Only ports 5 and 6 are working fine. 5 for lan and 6 for Wan.

In gui I have opened all ports
Cancel
Vote Up 0 Vote Down

Cancel