XG135 Home Registration

I would suggest re-imaging the firewall with a software ISO and NOT a hardware ISO and then use the home license serial number 

Hello, 

When I tried installing the software ISO it gave me an error and wouldn't allow me to install. Is there a way around this?

Through trial and error I figured it out and got it working. 

Again, thanks for all responses. 

What did u do? do u have any tutorial?

Replace the disk or totally format the disk.

Ian

Thank u for the response;

I've managed to install SW.iso on XG 135, but right now i have Problem with LAN links.

Only 2 out off 9 are seems to be working.

LAN 1 port is now LAN 5 and WAN is LAN 6.
The others LAN have no link at all.

what can i do? i need minimum 4 LANs for my 4 rooms in my home setup.

Thank u for the response;

I've managed to install SW.iso on XG 135, but right now i have Problem with LAN links.

Only 2 out off 9 are seems to be working.

LAN 1 port is now LAN 5 and WAN is LAN 6.
The others LAN have no link at all.

what can i do? i need minimum 4 LANs for my 4 rooms in my home setup.

Tabson 

All of your LAN links are working. But you are correct, they are now backwards and if you need to restore from a backup for whatever reason they will change again from my experience. You will need to take the time to map them out to see what links in the GUI are actually mapped to the link numbers on the XG135 appliance. It only took me about 5mins but it was weird at first. 

Try plugging a live cable into each port, one at a time, wait for about a minute to see if it comes alive.

then look at the gui to see which port it is.

ian

Thanks for your reply

unfortunately only 2 ports are available ( 5 and 6) and working fine.

Other lan ports are dead.  

If i load orginal firmeware on in all lan ports are working fine. 

In gui I have opened all land ports but still no link. 

Thanks for your reply!

I have already tried your method but there are still dead. No link or whatsoever. 

Only ports 5 and 6 are working fine. 5 for lan and 6 for Wan. 

In gui I have opened all ports 

Hello Jacob Roycer 

When you say original firmware you mean the HW firmware?

Yes, when I use HW firmware all LAN ports are Online and working correctly, but there is my old Company license on.


I tried reinstalling the system  with all ports connected to end devices, but only 2 out of 8 are working when XG home version is installed.

When u restart XG 135 u can see all ports online till firmware is being load. After that, only 2 are still alive.

Please post a copy of your network interface page.

Ian