This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unable to boot Sophos home firewall

Hello folks,

I have used Sophos Firewall home in the past with ESXI and was so happy about that got a machine to be used as router.

I performed the installation via UEFI on a 256gb nvme drive and everything went well.

When I rebooted the PC, the boot started but my PC always freeze right at the beggining and the only message I see is Booting '19_0_1_365' and then the machine freezes.

After looking on the forum, I found similar cases where the recomendation was to install using Legacy or Bios mode instead of UEFI.

The issue I'm facing is that burning the image SW-19.0.1_MR-1-365 both with RUFUS and WIN32IMGon multiple pen-drives, it is only recognizable as UEFI available devices, but I can't boot from it no matter what I do.

Is there a way to generate the install pen drive in LEGACY or BIOS mode?



This thread was automatically locked due to age.
Parents Reply Children