This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Honestly this is too hard for me!

I have been using most basic functions of Sophos Firewall and so far I have been lucky that I do not have any issues with updating firmwares. I would not have the capacity or ability to troubleshoot should anything went wrong. So I have decided to retire the SG115Rev2 in favour of a simple home router. But before I do that, does anyone know if I can install a simple software in SG115Rev2 that will be similar to a home router? 



This thread was automatically locked due to age.
Parents
  • This is so frusfrating - my ignorance knows no bounds. I thought the TP-Link Archer C2300 would suit my basic requirements until I tried to reserve 50 IP addresses. It can only reserve 32 IPs. Never occurred to me to check until I reached the reservation limit. I looked around and could not find any home routers that can reserve above 32 IP addresses. I think that is very limiting since IOTs are so common now.

    SG115 Rev2 | NEXCOM DNA 120 | Intel Atom E3827 Bay Trail Dual Core 1.7GHz | 8GB DDR3 | 64GB SSD | Totally no idea what I was doing!

Reply
  • This is so frusfrating - my ignorance knows no bounds. I thought the TP-Link Archer C2300 would suit my basic requirements until I tried to reserve 50 IP addresses. It can only reserve 32 IPs. Never occurred to me to check until I reached the reservation limit. I looked around and could not find any home routers that can reserve above 32 IP addresses. I think that is very limiting since IOTs are so common now.

    SG115 Rev2 | NEXCOM DNA 120 | Intel Atom E3827 Bay Trail Dual Core 1.7GHz | 8GB DDR3 | 64GB SSD | Totally no idea what I was doing!

Children
No Data