This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XGS no login possible // Sophos XGS kein Login möglich

Hi Forum,

I would like to set up a Sophos XGS116 that was already in use. Unfortunately I am missing any credentials and I do not know how the interfaces were configured. In the docs there are 2 ways to use the reset button:

  1. Hold for 10 seconds
  2. Hold short, wait 2-3 seconds and then hold until the status LED blinks 3x red.

==> Neither of these works. I currently can't get to the Sophos via https://IP:4444, via ssh and I'm running out of ideas on how to proceed here.

Does anyone have any advice for me?



Hi Forum,

ich möchte eine Sophos XGS116 aufsetzen die schon im Einsatz war. Leider fehlen mir jegliche Zugangsdaten und mir ist nicht bekannt, wie die Interfaces konfiguriert wurden. In der Doku stehen 2 Varianten den Resetknopf zu verwenden:

  1. 10 Sekunden halten
  2. Kurz halten, 2-3 Sekunden warten und dann halten bis die Status LED 3x Rot blinkt.

==> Beides geht nicht. Ich komme aktuell nicht auf die Sophos per https://IP:4444, per ssh und mir gehen die Ideen aus, wie ich hier weiter komme.

Hat jemand einen Rat für mich? 



This thread was automatically locked due to age.