Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 1455 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Disabling of Management Port

BeEf

Hello,

I have some issues with the management port which is in the same network as a management network that I want to "hide" behind the firewall.



I changed some routing (on 10 GBit Port) with resulted into two interfaces on the firewall in the same network and some (asynchronus routing issues).

XG550_RL02_SFOS 18.5.3 MR-3-Build408# route -e
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
...
172.21.12.0 * 255.255.255.0 U 0 0 0 PortMGMT2
172.21.12.0 * 255.255.255.0 U 0 0 0 LAG02.200


Disconnecting the PortMGMT2 seems not to help. Can it be disabled? How?
For the moment I chaned the ip from 172.21.11.81 to 172.21.13.81.

If I connect a device (172.21.13.1/32) on the management port (172.21.13.81) there will be NO rule required to access 172.21.13.0/24 from  a client on 172.21.13.0/24 right?

Regards
BeEf



This thread was automatically locked due to age.
Unfiltered HTML