Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 38 subscribers
  • Views 1274 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG in Bridge Mode with Verizon G3100

Hawkeye556

Firewall newbee here.

I currently have XG ver 19 configured in bridge mode and working for the most part with the Fios router. All wired traffic is working correctly, However the Wifi connections to the Fios router are not being forwarded or Routed to the Firewall.

How do i route all Wifi traffic connecting to the G3100 router to the firewall?

Basically, I have Roku WIFI devices that cannot connect to my DLNA servers on the lan. 

Thanks in advance.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    are you saying the wifi (AP) is directly connected to the router not the XG? If so, you will need to move the AP to the inside connection of your network.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    I have the standard Fios configuration, G3100 is also the WIFI Access point - i connected the Firewall in Bridge mode - the Wan port connected to the G3100 lan port and the Firewall Lan port connected to a switch. Everything on the lan to wan work correctly as does all wired network devices. When i connect a laptop to the Fios Wifi it will not connect to any lan devices  -NAS, Printers etc. but will connect to the internet.

  • 0 in reply to Hawkeye556

    Hi,

    your will need a firewall rule allowing the traffic into your network.

    ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply Children
No Data
Unfiltered HTML