Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 38 subscribers
  • Views 379 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec Tunnel up but no traffic passe

MMASLOUH

Hi,

i made a lab for IPSec VPN by connecting two Sophos XG 87 directly via cable (Port2 - Port2).

The IPSec tunnel is up but the ping doesn't successes.

This is my lab architecture.

Sophos XG 1 Port 2 (WAN):

IP: 213.0.0.1/29

GW : 213.0.0.2

Sophos XG 2 Port 2 (WAN):

IP: 213.0.0.2/29

GW : 213.0.0.1

Ping from 172.16.100.100 to 172.16.100.254 OK

Ping from 172.16.100.254 to 172.16.100.100 OK

Ping from 172.16.10.100 to 172.16.10.254 OK

Ping from 172.16.10.254 to 172.16.10.100 OK

Ping from 213.0.0.1 to 213.0.0.2 OK

Ping from 213.0.0.2 to 213.0.0.1 OK

Ping from 172.16.100.254 to 172.16.10.254 fail.

Ping from 172.16.100.100 to 172.16.10.254 fail.

Ping from 172.16.10.254 to 172.16.100.254 fail.

Ping from 172.16.10.100 to 172.16.10.254 fail.

Ping from 172.16.100.100 to 172.16.10.100 fail.

FW : 18.5



This thread was automatically locked due to age.
Parents Reply Children
Unfiltered HTML