Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 42 subscribers
  • Views 1805 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG 115: Expected throughput?

batun khal

I just installed an XG 115 Rev 2 at a site and am starting configuration. After a factory reset and minimal setup, it is consistently getting 310 Mbps down and 45 Mbps up on on their cable modem https://omegle.onl/ https://vshare.onl/. The previous Ubiquiti EdgeRouter 4 was getting 720 down and 50 up. The ISP is providing 1 Gbps down and 50 up.

Does this throughput sound correct for an XG 115? They have very few (<5) users, but want do want to approach 1 Mbps down, which they are paying for. Is another model a better choice for this site?



This thread was automatically locked due to age.
  • 0

    Hi,

    please check the GUI -> IPS settings (DDOS) and disable if any are set.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0

    How minimal is your 'minimal' configuration? XG 115 Rev 2 is a pretty old model. Spec sheet says raw firewall performance is 3,500 Mbps but that will take a very swift dive once you start to use any useful features.

    As an example, my XG 230 Rev 2 is rated for 32,000 Mbps firewall only but maxes out at about 750 Mbps with IPS, IDS etc. (2-3 users only).

Unfiltered HTML