This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High availablity TCP port 2600

We have 2x  XGS2100 (SFOS 18.5.2 MR-2-Build380)  in High availablity in (Active-Passive)

They have a Dedicated HA link

Dedicated peer HA link IPv4 address 192.168.10.2

Dedicated peer HA link IPv4 address 192.168.10.1

When I look in Log viewer there are a lot of Invalid Traffic TCP Port 2600

Is this normal for HA setup? (hope you can read the screenshot)

I have copied 1 line in text:

2022-01-22 11:33:33Firewallmessageid="01001" log_type="Firewall" log_component="Invalid Traffic" log_subtype="Denied" status="Deny" con_duration="0" fw_rule_id="N/A" nat_rule_id="0" policy_type="0" user="" user_group="" web_policy_id="0" ips_policy_id="0" appfilter_policy_id="0" app_name="" app_risk="0" app_technology="" app_category="" vlan_id="" ether_type="IPv4 (0x0800)" bridge_name="" bridge_display_name="" in_interface="" in_display_interface="" out_interface="" out_display_interface="" src_mac="" dst_mac="" src_ip="192.168.10.1" src_country="R1" dst_ip="192.168.10.2" dst_country="R1" protocol="TCP" src_port="45806" dst_port="2600" packets_sent="0" packets_received="0" bytes_sent="0" bytes_received="0" src_trans_ip="" src_trans_port="0" dst_trans_ip="" dst_trans_port="0" src_zone_type="" src_zone="" dst_zone_type="" dst_zone="" con_direction="" con_id="" virt_con_id="" hb_status="No Heartbeat" message="Could not associate packet to any connection." appresolvedby="Signature" app_is_cloud="0"



This thread was automatically locked due to age.
Parents
  • update1

    after the reboot of the Auxiliary firewall it stopped making connection to port 2600

    While the Auxiliary firewall was starting there were also a lot of Invalid Traffic to port 65011

    I do not know if that is normal behavior

    Can not find any info on TCP 2600 or 65011

    Port TCP 2600 was used in the past (Windows 98) by a trojan Digital Root Beer and hpstgmgr

Reply
  • update1

    after the reboot of the Auxiliary firewall it stopped making connection to port 2600

    While the Auxiliary firewall was starting there were also a lot of Invalid Traffic to port 65011

    I do not know if that is normal behavior

    Can not find any info on TCP 2600 or 65011

    Port TCP 2600 was used in the past (Windows 98) by a trojan Digital Root Beer and hpstgmgr

Children
No Data