This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing over SSL Site to Site VPN Tunnel - using remote WAN interface

Hi Folks...

Need some advice for a routing problem, maybe someone can shad some light in it for me? i saw a lot of similar posts but with no luck...

Site A is connected by SSL site to site VPN to site B where some clients and server are connected. Normal traffic is working fine - both way, currently no restrictions (ports) and no IDS / IPS rules are in place so far. Both sites have theire own ISP / Internet Provider, normal Internet Traffic is going over the according ISP

Both sites are using Sophos XG with 18.5.x Firmware.

Now i need to manage it, that certain Clients / IP Phones from site B are routed over the SSL VPN Tunnel to the site A and access Internet over the site A ISP for a dedicated target IP / Network. All other Internet traffic should still flow over ISP from site B.

How can i manage this in the Sophos or do i need to add a local static route to the client / phone? If local static route, what will be the next hop / gateway?

Any help is welcome...



This thread was automatically locked due to age.
Parents Reply Children
No Data