This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Simple VLAN setup, devices picking up DHCP from wrong VLAN

I have a rather simple lab setup that i'm testing before I go live -

Sophos XGS 87 - Netgear GS108PE 

- POS Handheld

- Epson TU22

- Unifi LR AP

A VLAN has been configured for the Epson and handheld, and this VLAN (VLAN10) is tagged on the Port 4 for the AP. The VLAN works over the AP just fine, and the handheld is getting the correct IP range from the DHCP server that was configured for it in the firewall. Port 5 is tagged for VLAN10, and the Epson is has a static IP that is the same range as what has been configured for that VLAN.

No matter what I try, this printer keeps getting an IP assigned by the VLAN1 DHCP. There has to be something I'm missing here, but with such a simple setup to begin with I'm running out of ideas. Any insights would be great.



This thread was automatically locked due to age.
Parents Reply Children
No Data