Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 42 subscribers
  • Views 770 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG3300 will not load latest firmware.

OldSkoolMC

Current version is SFOS 17.5.16 MR-16-Build830.  I have two XG330 firewalls in HA mode. SFOS 18.5.1 MR-1-Build326 appears to be on the firewall but will not boot up.  Everytime the firewall reboots it reverts to the 17.5 version.

Steps taken:

1) Manually uploaded 18.0 version - same result.

2) Manually uploaded 18.5 version - same result.

3) Tried letting the firewall "download" and "installed" both versions - Firewall appears to downloand and successfully install firmware.  Every box that pops up is Green and states the firewall will start with the next reboot with new update.  

Any ideas why the firewall will not boot into either version of 18?   



This thread was automatically locked due to age.
  • 0

    try breaking the ha and see if one of them will update. there are significant changes between the versions.

    ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML