This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Nintendo Switch

I was wondering if anyone had any experience in getting a Nintendo Switch to allow online gameplay/eshop etc. when using XG Home Version?  I have been racking my brain for days and cannot seem to get it figured out.  It appears that, in the log viewer almost all packets are being dropped by Rule 0 and I cannot seem to get it working.  It has worked twice for no reason and then stops again.  Any help would be appreciated.

Here is an example of the dropped packet from the log viewer.

messageid="01001" log_type="Firewall" log_component="Invalid Traffic" log_subtype="Denied" status="Deny" con_duration="0" fw_rule_id="N/A" nat_rule_id="0" policy_type="0" user="" user_group="" web_policy_id="0" ips_policy_id="0" appfilter_policy_id="0" app_name="" app_risk="0" app_technology="" app_category="" vlan_id="" ether_type="IPv4 (0x0800)" bridge_name="" bridge_display_name="" in_interface="" in_display_interface="" out_interface="" out_display_interface="" src_mac="" dst_mac="" src_ip="10.0.0.46" src_country="R1" dst_ip="52.6.197.26" dst_country="USA" protocol="TCP" src_port="54466" dst_port="443" packets_sent="0" packets_received="0" bytes_sent="0" bytes_received="0" src_trans_ip="" src_trans_port="0" dst_trans_ip="" dst_trans_port="0" src_zone_type="" src_zone="" dst_zone_type="" dst_zone="" con_direction="" con_id="" virt_con_id="" hb_status="No Heartbeat" message="Could not associate packet to any connection." appresolvedby="Signature" app_is_cloud="0"
I am also attaching a screenshot of my firewall rule.  Hopefully this helps. 
I have tried disabling web filtering, HTTP/HTTPS scanning, IPS, and Application Control.  Still nothing. 


This thread was automatically locked due to age.
Parents
  • Hi,

    first thing to do is remove the linked NAT, you don't need them and they only cause confusion when debugging.

    The rule 0 is hit when a request does not match any firewall rule. Please try again after you have deleted the linked NATs

    Ian

    XG115W - v19.0.1 mr-1 - Home

    1225v5 6gb ram, SSID, 4 NICs 20w - v19 EAP - on holiday.

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi,

    first thing to do is remove the linked NAT, you don't need them and they only cause confusion when debugging.

    The rule 0 is hit when a request does not match any firewall rule. Please try again after you have deleted the linked NATs

    Ian

    XG115W - v19.0.1 mr-1 - Home

    1225v5 6gb ram, SSID, 4 NICs 20w - v19 EAP - on holiday.

    If a post solves your question please use the 'Verify Answer' button.

Children