This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG is Kernel Panicking

Since updating to, I've noticed my firewall is Kernel Panicking at least 5 or 6 times a day. The best uptime I've been able to achieve is 4 hours. I originally suspected hardware, but have since moved the XG to new hardware. Has anyone else seen this issue?

This thread was automatically locked due to age.
Parents Reply Children
  • Hello there,

    Thank you for the update.

    So in that case you would need to capture the console logging

    Using PuTTY, go to 'Session' - 'Logging.'

    Here, select "All session output', and set the file name to a folder and name for later retrieval.

    Configure the Serial connection to use the proper COM port on your PC and a Speed of 38400.

    Start the session, and log in to ensure it’s all proper.

    Once logged in, you can leave it there or log out and leave the session at the password prompt. Either way, leave the session active and allow it to capture the output from the next reboot.

    Once that reboot occurs, you can end the Serial connection and provide the logs to support further investigation.

    Have you open a case already for this, if not please open one and share the Case ID with me.


    Emmanuel (EmmoSophos)
    Community Support Engineer | Sophos Technical Support
    Sophos Support VideosProduct Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.