Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 2014 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAn over RED20 Tunnel

Chacha Kairu

Hi Team, 

Need to segment a remote branch network using VLAN. 

My current setup. 

HQ -> XG210 build 18.5. With already configure VLANS. It's also the DHCP server for the VLAN network. 

      -> VLAN attached to remote RED interface/Hardware with the necessary F/w rules

Remote branch. -> RED20  on Standard Mode. on Zone RED with DHCP configured (different from VLAN) 

                          -> Layer 3 Switch  connected to RED20

                         -> AccessPoint connected to the switch

I can't get IPs from DHCP  on switch's VLAN tagged  interface at the remote branch. 

Please help



This thread was automatically locked due to age.
Parents
  • 0

    You need to create a bridge with the RED interface and your local Interface. Then create the VLANs + DHCP etc. on the Bridge. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    You need to create a bridge with the RED interface and your local Interface. Then create the VLANs + DHCP etc. on the Bridge. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML