Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SOPHOS DOES NOT BOOT

Dear Team

Please assist I have SOPHOS XG 330 when booting it does not come up it only display SOPHOS Protection.



This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hi Moses, Thanks for reaching out to Sophos Community.

    Can you connect the Serial/Console cable (Baud rate 38400), Boot the appliance, and share the output.

  • Below is the output

    BIOS Date: 07/20/2018 17:08:46 Ver: 5.0.1.1
    Processor Type: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
    Processor Speed: 3300 MHz
    Total Memory: 12288MB (DDR4 2133)

    USB Devices total: 0 KBDs, 0 MICE, 0 MASS, 0 HUBs

    Detected ATA/ATAPI Devices...
    Version 2.17.1255. Copyright (C) 2018 American Megatrends, Inc.
    Sophos XG 330r2 Rev R1.02 (07202018)
    Press <DEL> or <TAB> to enter setup.
    Press <B> to enter BBS POPUP.

  • FormerMember
    0 FormerMember in reply to Moses Ngongi

    Hi ,

    I'm moving this thread to the correct forum ==> Sophos(XG) Firewall

    Detected ATA/ATAPI Devices...
    Version 2.17.1255. Copyright (C) 2018 American Megatrends, Inc.
    Sophos XG 330r2 Rev R1.02 (07202018)
    Press <DEL> or <TAB> to enter setup.
    Press <B> to enter BBS POPUP.

    Do you see any other events after this?

    Please ensure that SSD is detected in BIOS > Boot menu.

    Did you try reimaging the appliance?

    Reimage Sophos Firewall

  • Dear Kothari

    I do not see any other events after this.Hard Disk is detected in BIOS.I have tried to reimage the appliance. I am getting below 

    ######################################################

    Sophos FIRMWARE INSTALLER

    Created on: #Fri Apr 23 13:09:08 UTC 2021
    Firmware version: #18.0.5.586
    Contains Firmware for: SG115_XN01 SG115_XN02 SG115_XN03 SG115w_XN01 SG115w_XN02 SG115w_XN03 SG125_XN01 SG125_XN02 SG125_XN03 SG125w_XN01 SG125w_XN02 SG125w_XN03 SG135_XN01 SG135_XN02 SG135_XN03 SG135w_XN01 SG135w_XN02 SG135w_XN03 SG210_WP01 SG210_WP02 SG210_WP03 SG230_WP01 SG230_WP02 SG310_WP01 SG310_WP02 SG330_WP01 SG330_WP02 SG430_WP01 SG430_WP02 SG450_WP01 SG450_WP02 SG550_RL02 SG550_XN01 SG650_RL02 SG650_XN01 XG106_XN01 XG106w_XN01 XG115_XN02 XG115_XN03 XG115w_XN02 XG115w_XN03 XG125_XN02 XG125_XN03 XG125a_XN02 XG125w_XN02 XG125w_XN03 XG135_XN02 XG135_XN03 XG135w_XN02 XG135w_XN03 XG210_WP02 XG210_WP03 XG230_WP01 XG230_WP02 XG310_WP01 XG310_WP02 XG330_WP01 XG330_WP02 XG430_WP01 XG430_WP02 XG450_WP01 XG450_WP02 XG550_RL02 XG550_XN01 XG650_RL02 XG650_XN01 XG750_RL01 XG750_RL02 XG86_AM01 XG86w_AM01

    ######################################################

    Detected Appliance Model: XG330_WP02
    Cleaning Disk [OK]
    nvram_init failed with -7
    read device: Can't read disk signature
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    nvram_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    fwmgmt_init failed with -7
    /bin/insfw.sh: line 188: arithmetic syntax error
    press y to reboot

  • Sounds like rma time, please log a case.

    ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • FormerMember
    0 FormerMember in reply to rfcat_vk

    Hi ,

    Cleaning Disk [OK]
    nvram_init failed with -7
    read device: Can't read disk signature
    nvram_init failed with -7
    nvram_init failed with -7

    There seems to be some issue with the hardware. I'd request to raise a support case to get it RMAed: Creating/Updating Cases from the Support Portal