Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 40 subscribers
  • Views 1567 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unable to get Plex working remotely

Shank Mohan

Hi,

I have been through the various posts on the forum and still unable to get my plex server connected remotely.

Plex server internal IP: 192.168.99.33:32400

The server is a VM, which has a dedicated NIC, plugged straight into the sophos appliance.

I used the DNAT wizard to create the rule and it spit out the below, I also attempted to change the plex service to just be http ( i have a webserver running on the same box, and I can hit it).

Within the same LAN as the server I can browse to 192.168.99.33:32400 with no issues.

Any guidance would be appreciated!



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Shank Mohan

    Why would people be accessing your LAN unless to access the PLEX?

    If you are seeing access from countries you don't to provide access to then you need to setup a drop firewall rule and NAT pointing to a dead end IP address (ficticous).

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML