Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 40 subscribers
  • Views 744 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN access to WLAN-Clients

Bernd Lebender

Dears,

we have a Sophos XG behind a Fritz!Box. The Sophos XG controls a LAN (172.16.16.0/255.255.255.0) and a WLAN (10.0.6.0/255.255.255.0). For the purpose of remote administration VPN been set up. Using SSL-VPN-Client gets me to all servers which are attached to the LAN. However the Clients and Servers on the WLAN are not reachable. Ping gets me to 10.0.6.1, i.e. the Firewall  only.  My local Sophos distributor has no idea how to reach the WLAN clients. 

Is there someone out there who can help me ?

Thanks in advance 

Bernd 



This thread was automatically locked due to age.
  • +1

    Hallo Bernd and welcome to the Sophos Community!

    I've moved your question to the XG Community where you'll get better help for XG than you would in the UTM Community.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • +1

    Hi,

    Do you have a firewall rule allowing access from the VPN to the WLAN? Also what does logviewer show for the attempted connections?

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0

    First of all, the SSLVPN config needs to include the network range of your WLAN. So the profile needs to have the route of 10.0.6.0/24. Then you need the firewall rule to include this traffic (VPN to WLAN). 

    __________________________________________________________________________________________________________________

Unfiltered HTML