How to delete routing table of SSL-VPN client

Hi Pounraj C,

Thank you for reaching out to Sophos Community.

After connecting the SSL VPN client, routes for networks(added under permitted network resources of SSL VPN policy) will be added on the end machine.

If "Use as default gateway" is enabled in the SSL VPN policy, then a default route(0.0.0.0/0) will also be added on the end machine, which will route internet traffic through the SSL VPN tunnel.

If you're not willing to route internet traffic via SSL VPN tunnel then you may disable "Use as default gateway" in the SSL VPN policy.

Hi Yash Kothari

is it possible to route all traffic including internet traffic via a split tunnel

or is it possible to remove a particular route entry (ip) on SSL VPN full tunnel

It would not be possible to route internet traffic with a split tunnel configuration.

Pounraj C said:

is it possible to route all traffic including internet traffic via a split tunnel

Could you please brief me more about this?

ok

 I have connected SSL VPN with a full tunnel, I try to access one particular IP say for eg  3.100.12.23,

while accessing this IP 3.100.12.23, the traffic is passed through  PCs gateway (192.168.43.1)except this IP all my traffic is passed through SSL VPN  as i expected

i typed route print  on cmd

i need to remove the route entry which is on the red box so that all traffic pass through 10.10.10.2 SSL VPN server 

Were you able to remove the entry on the windows machine and test it ?

Was this route entered Manually? 

Were you able to remove the entry on the windows machine and test it ?

Was this route entered Manually? 

That ip is a xg firewall ip which is deployed on AWS marketplace , I didn't create route manually, this route is automatically adding when connecting SSL VPN

Hi Pounraj C,

Please connect SSL VPN client, right-click on client symbol > View log, and share the file output here or in PM.

ok Yash

I sent you a log file on PM.