This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DNAT Problems on MR-5

I've a simple configuration on XG86, Just a rule for navigation and a DNAT. If i try to reach the exposed service fails, my log say that fw rule and nat rule is correct but still reach the service. No strange routers or double nats.

Any suggestions?

Thanks a lot

Sorry for my bad English



This thread was automatically locked due to age.
Parents Reply
  • FormerMember
    +1 FormerMember in reply to David Moro

    Assuming matching NAT ID: 1 and firewall rule ID: 2 are correct.

    As per the packet flow, the traffic is being forwarded to internal server 10.1.1.10 for destination port 8080, but there’s no reply coming back.

    I'd suggest try applying SNAT as the default MASQ and check whether the server is accessible publicly or not.

Children