Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 3 answers
  • Subscribers 41 subscribers
  • Views 5263 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MS Azure - IPSec Tunnel (S2S) with BGP Routing

Karnov

Is there any documentation on getting BGP working through an Azure IPSEC VPN tunnel to an onprem Sophos XG 230?

I have an IPSEC tunnel established between onprem and Azure and would like to be able to route traffic from vnet peers and the Azure Point to site VPN back to onpremise resources.

Any guidance is helpful.

Thank you!



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to LuCar Toni

    Thanks, this looks like a new (finally!) updated documentation connecting Azure to an onprem XG.  I don't have a complex environment that changes or needs to be updated automatically, so if static routing works then great.  I'll try this out.

    Thanks!

  • 0 in reply to LuCar Toni

    So I was able to create the IPSEC VPN using a tunnel interface instead of the site-to-site method by following the instructions you posted.

    For the AWS portion, the instructions referring to creating two tunnels.  I am confused about how to do this with Azure as I can only create one connection per Local gateway. 

    Do you have any other instructions or can tell me how to create two IPSEC tunnels within Azure so I can test out BGP?

Unfiltered HTML