Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Update V 18 MR-1 to MR-5 failed and became unreachable

Hi,

are there any known issues regading updating a XG 135w firewall from Version 18 MR-1 to MR-5?

Today I was updating a remote site. After that the update the firewall was not reachable via the external and internal (IPSec) inerface. I (almost) expected that on the internal Interface as this is IPSec. However the tunnel should have been rebuilded automatically.

I was really surprised that I could not been reached through the WAN Interface and the is really a problem as this is a remote site in the Netherlands (I am in Germany). I tested this successfully before the update. The MR-5 was not shown in the Update dialog and needed to be downloaded from the website and uploaded and booted in the second slot of the firewall. 

I also did a test on another firewall. The Update from MR-3 -> MR-4 worked without any issues. I was not able to do V18 MR-1 to V18 MR-5 testing on this firewall as the MR-1 was not available. Only V18 MR-4 & MR-5 are downloadable. Also on this firewall the MR-5 was not displayed for the update.

Best regards,
BeEf



This thread was automatically locked due to age.