Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 40 subscribers
  • Views 1676 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to apply bandwidth restrictions for a ip host group?

Miguel Cruz

Hi, im trying to apply this guide https://support.sophos.com/support/s/article/KB-000035653?language=en_US to my setup but it doesnt work, does anybody if i can set a bandwith limit for a complete group?

As you can see, the limit doesnt work. Anybody has an idea? thanks!



This thread was automatically locked due to age.
Parents
  • 0

    Hi Miguel Cruz,

    1. if your internet BW not dedicated , please make sure you have correct setting value for "Total available WAN bandwidth"
    on Configure --> System Services ---> Traffic Shapping Setting, sometimes the issue come from your BW is up to not 1:1
    2. Please check not only from speedtest, check using another speedtest website.

Reply
  • 0

    Hi Miguel Cruz,

    1. if your internet BW not dedicated , please make sure you have correct setting value for "Total available WAN bandwidth"
    on Configure --> System Services ---> Traffic Shapping Setting, sometimes the issue come from your BW is up to not 1:1
    2. Please check not only from speedtest, check using another speedtest website.

Children
Unfiltered HTML