Access point stuck in boot loop. LED stays solid RED from boot. XG Firewall cant see it in the pending list. Tried to reset, didnt work. How can i recover it?
Tried to reset from Serial Port but U-Boot is not responding to any key to stop autoboot "Hit any key to stop autoboot: 0". Because of that I cant run uboot command.
How do i stop autoboot?
Thanks so much.
Firewall: Sophos XG Firewall Home Edition (Latest)
Access Point: APX 120
License: No license
Log from Serial Port:
[00] Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00120 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000000 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1338 - bootable_media_detect_entry, Start B - 1678 - bootable_media_detect_success, Start B - 1691 - elf_loader_entry, Start B - 5068 - auth_hash_seg_entry, Start B - 7209 - auth_hash_seg_exit, Start B - 577087 - elf_segs_hash_verify_entry, Start B - 694221 - PBL, End B - 694245 - SBL1, Start B - 785250 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786695 - boot_flash_init, Start D - 52830 - boot_flash_init, Delta B - 843665 - boot_config_data_table_init, Start D - 3831 - boot_config_data_table_init, Delta - (419 Bytes) B - 850863 - clock_init, Start D - 7570 - clock_init, Delta B - 862907 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:1,Subtype:0 B - 866321 - sbl1_ddr_set_params, Start B - 871419 - cpr_init, Start D - 2 - cpr_init, Delta B - 875801 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13175 - sbl1_ddr_set_params, Delta B - 889540 - pm_driver_init, Start D - 2 - pm_driver_init, Delta B - 959698 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 975316 - Image Load, Start D - 152333 - QSEE Image Loaded, Delta - (297752 Bytes) B - 1128076 - Image Load, Start D - 1446 - SEC Image Loaded, Delta - (2048 Bytes) B - 1138496 - Image Load, Start D - 224138 - APPSBL Image Loaded, Delta - (458523 Bytes) B - 1363032 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1369252 - SBL1, End D - 677115 - SBL1, Delta S - Flash Throughput, 2008 KB/s (758742 Bytes, 377712 us) S - DDR Frequency, 537 MHz U-Boot 2012.07 [Chaos Calmer unknown,unknown] (Nov 02 2018 - 08:13:09) smem ram ptable found: ver: 1 len: 3 DRAM: 256 MiB @machid : 0x8010100 NAND: spi_nand: spi_nand_flash_probe SF NAND ID 0:ef:ab:21 SF: Detected W25M02GV with page size 2 KiB, total 256 MiB SF: Detected MX25L1605D with page size 4 KiB, total 2 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000 258 MiB MMC: In: serial Out: serial Err: serial machid: 8010100 flash_type: 0 Hit any key to stop autoboot: 0 Creating 1 MTD partitions on "nand1": 0x000000000000-0x000010000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI error: ubi_read_volume_table: the layout volume was not found UBI error: ubi_init: cannot attach mtd2 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Error, no UBI device/partition selected! Creating 1 MTD partitions on "nand1": 0x000000000000-0x000010000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI error: ubi_read_volume_table: the layout volume was not found UBI error: ubi_init: cannot attach mtd2 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Error, no UBI device/partition selected! Wrong Image Format for bootm command ERROR: can't get kernel image! Creating 1 MTD partitions on "nand1": 0x000000000000-0x000010000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI error: ubi_read_volume_table: the layout volume was not found UBI error: ubi_init: cannot attach mtd2 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 Error, no UBI device/partition selected! Wrong Image Format for bootm command ERROR: can't get kernel image! resetting ...
This thread was automatically locked due to age.
