Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

More SDWAN Issues

Good Morning,

I have migrated a client with a main office and 4 branch offices to SDWAN. I have one issue that I am seeing and I haven't found any references.

The remote sites will attempt to download files from a *ix server at the main office. This fails until I replace the SDWAN routes with static routes. I can verify this in packet capture. The *ix server is their POS system and all other functions are fine.

Any advice? I am sure there is more info that would be helpful, so I'll be happy to provide.

Thanks,
Brent



This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    How is the main office firewall connected to the beach offices? Is there a site-to-site VPN or MPLS connection? 

    If there’s no site-to-site connection between main and branch offices, Is the internal server at the main office configured with WAF or DNAT rule? 

    Would it be possible for you to provide a network diagram, screenshots of the configured SDWAN policies, and static route? 

    Thanks,

  • The main office and the branch office are connected via ELAN. We run an IPSEC - VTI tunnel between them over the ELAN.

    There are no NATS applied to the ELAN interface.

    The SDWAN and Static routes are just x.x.x.x/24 and y.y.y.y/24.

    It is a very basic setup. I'll post some screen shots later.

    Thanks!