Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 72 replies
  • Answers 2 answers
  • Subscribers 60 subscribers
  • Views 36905 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG Firewall v18 MR-4: Feedback and experiences

LuCar Toni

New Thread to cover changes / feedback / experiences. 

"Old" MR3 Thread: https://community.sophos.com/xg-firewall/f/discussions/123403/xg-firewall-v18-mr-3-feedback-and-experiences

Release Notes: https://community.sophos.com/xg-firewall/b/blog/posts/xg-firewall-v18-mr4-is-now-available



This thread was automatically locked due to age.
Parents
  • 0

    For testing purposes I migrated 2 XGs to 18-MR4 and I have the issue that one XG is in Sophos Central Firewall Manager still shown as MR3.

    XG Console:

    Sophos Central Firewall Manager:

    Post

    A reboot dosn't resolve the issue. 

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    For testing purposes I migrated 2 XGs to 18-MR4 and I have the issue that one XG is in Sophos Central Firewall Manager still shown as MR3.

    XG Console:

    Sophos Central Firewall Manager:

    Post

    A reboot dosn't resolve the issue. 

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to Ben@Network

    Two firewalls or one Cluster? How long since the Update? Did you refresh the Cache of your browser? 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    It is a single filrewall. I've updated the XG yesterday in the morning (it is more than 24 hours ago, the reboot is also more the 24 hours ago). I cleared the browser cache and use a private session, still shown as MR3. I also tested it with another PC, which normaly does not use the Central Console but shown as MR3 too.

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Ben@Network

    Still the old version shown in Central? Can you check on the XG Firmware images, that MR4 is actually loaded? Just to be sure? 

    __________________________________________________________________________________________________________________

Unfiltered HTML