Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 39 subscribers
  • Views 6020 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems to configure High availability

Ruflex

Hi! i have 2 Sophos SG230 whit SFOS 18.0.3 MR-3.

I configure high availability in active-pasive mode, whit the same key in the 2 firewalls. I configure the second firewall in auxiliary and conects all cables to firewalls.

When initiate ha, the primary firewalls show "HA could not be enabled"

I run this command in advanced shell: cat /log/applog.log | grep "ha:"

Nov 26 11:56:49 Validation Failed For Ha interface IP

Nov 26 11:56:49 ha: pollenableha: enableha failed

how i can fix this problem?? Thanx



This thread was automatically locked due to age.
Parents Reply Children
  • FormerMember
    +1 FormerMember in reply to Ruflex

    Hi ,

    Thank you for your cooperation and patience! 

    You were able to resolve this issue by ensuring there are no other interfaces configured on the secondary unit except HA dedicated interface and one LAN port. 

    Requesting you to share the exact steps with the Community. 

    Thanks,

Unfiltered HTML