Hardware Limitations In Home version

Question

Is it possible to get the hardware limitations removed for the home version? Or have they been removed in V18?

JasP · Answer

@Michael Caplan 
 Sophos don't want your $50. More hassle than it is worth and I can well understand why they dropped it for UTM. One of the things I don't miss moving to XG is the 50 IP limit. In itself it was OK for a home network but as it is my 'playground' I quite often exceeded it testing new network setups. Ended up having to reinstall UTM each time it happened. 
 I don't agree it is 'easy' to verify whether Home is genuinely being used at 'Home' - which would also require more time and effort (which means money). Sophos put a cap on to prevent people using it illegally in large commercial environments. 
 I am grateful to be able to use it free at home. It also benefits Sophos (which is why they do it). From being able to use it and evaluate it at home, I have since become a Sophos partner and have several installations planned for customers. 
 I also really can't understand your view point. The current cap should allow you to use it in a home environment, even with 1Gb connections, for the forseeable future as long as you have the right spec hardware. What is the problem? 
 @Mike Scott 
 I've installed the home edition on both a 125 rev2 and a 430 (my current home kit). It can be tricky getting it to install on the installed SSD so I just replaced it with a new SSD and then installation was easy. A small SSD is cheap and I got the 430 for &pound;300 which is cheaper than anything I could buy new of similar spec and it fits nicely in my rack (yes, I'm sad enough to have a rack at home). The only thing you lose is hardware specific support (for instance the LCD display doesn't show anything meaningful).

rfcat_vk · Answer

Hi Michael, 
 let me try an put things into perspective 
 1/. XG is a 64bit OS. 
 2/. many XG installations only have 2gb of ram using v17, v18 needs 4gb. 
 3/. 75% ram usage on a linux system is not an issue like on a MS system. Linux has a very much better memory management system and uses swap effectively. 
 4/. a while ago many forum member were very upset that their XG's memory usage was running around the 70-80% mark. Sophos XG devs took notice added a lot of new functionality and refined the XG, they also tuned the load management as reported in the GUI and diagnostics. 
 My system is currently showing around 60% memory usage which grows if I leave the GUI open for too long, but shrinks when the GUI is closed. Prior to v18 my XG memory usage was around 75% on a 6gb system. 
 If you are a home user and like to fiddle with your firewall settings, then a J1900 or XG85/6 or XG 105/6 is not for you. If you are a set and leave then they will be fine depending on your internet connection speed of course. I have J1900 4 port NIC system which I use for testing, but it is too slow when making changes or reviewing logs for my regular use. 
 Ian