how I can control browsing traffic ( HTTP, HTTPS) using application control?

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

Mohamed Tawfik — Sat, 07 Jul 2018 06:41:40 GMT

Thank you.

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

LuCar Toni — Sat, 07 Jul 2018 06:14:35 GMT

Then activate Service Any and scan http/s. While IPS, ATP, Web control is enabled.

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

Mohamed Tawfik — Sat, 07 Jul 2018 05:43:43 GMT

yes, I know all these
but I need to control traffic based on layer 7 ( application layer or application control)
when I use services I control the traffic based on layer 4 based on port number and in this case it's probably to came any malicious traffic using those port numbers, but
when I use the application (HTTP/ HTTPS ) I'm sure that is the real or actually traffic.

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

LuCar Toni — Sat, 07 Jul 2018 04:49:14 GMT

Can you explain the use case of this in more detail?

You can use as a service http/s and afterwards enable the applications / web control.

If you use service any, it will apply to all ports (plus http/s) and can control all apps and web requests.

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

Mohamed Tawfik — Sat, 07 Jul 2018 04:46:21 GMT

thank you for your replying

https isn't available as an application !!!

I need to make a policy that say
Source Zone LAN
Source Networks and Devices any
Destination Zones WAN
Destination Networks any
Services any
and control traffic using application control i need to allow http and https traffic only

RE: how I can control browsing traffic ( HTTP, HTTPS) using application control?

LuCar Toni — Sat, 07 Jul 2018 04:31:22 GMT

Hi,

Should be possible via Policy. Did you already check the LAN to WAN policy and play with the Application control policys / https policys.