Configuring VPN Remote Access for the first time on your Sophos XG Firewall? Check out this useful Community post!
We'd love to hear about it! Click here to go to the product suggestion community
I have setup new IPsec Connection under Ipsec Section and after that we are getting error(PSK incorrect) in Sophos Connect Client.
Hi Usman Khan1 For Sophos Connect Client, please refer to the configuration article- https://community.sophos.com/kb/en-us/133109PSK incorrect means- preshared key entered in the configuration is incorrect. It should be the same.
Hi Usman Khan1 If it is observed after setting up new IPSec connection under IPSec section then reason may be below:
In the new configured IPSec connection you might have setup remote gateway as in "*" (Any) which has updated the PSK in XG database with Sophos connection client setting as well.Please set local and remote ID in IPSec tunnel on which remote gateway is "*" (Any) that will prevent the updatation of PSK to other VPN which also works with IPSec technology and configured with PSK ( Like Sophos connect client, L2TP, Remote Access VPN if configured and present on appliance)
In reply to Vishal_R:
You Mean to mention Local and Remote Id.
In reply to Usman Khan1:
Hi Usman Khan1
Yes you may set either one or both.
On remote side I have to give same Id?
Hi Usman Khan1 If you are configuring the IPSec remote access under IPsec section in that it is better to set or configure local ID only and do not set remote ID and check the status.