We'd love to hear about it! Click here to go to the product suggestion community
I just received the message from the XG 105w that the firmware 16.05.8 MR-8 is available and should be installed. But so far I did not read anything (good or bad) about that version here. Is it recommeded to install the file or are there major issues ?
In reply to rfcat_vk:
Have you done, Configuration RESET or backup-restore activity!
In reply to lferrara:
Thank you for the feedback
As you have already mentioned that the behavior is persist from first release of XG.
The notification mail would be generated after set time to max +1 hour, as we have every hour thread to check the mail notification queue.
In reply to deeptibhavsar:
Thanks deeptibhavsar. If the system says that Daily report will be sent at specified time, the reports must be sent at that time and not with +1 random time.
A NC should be opened and fixed.
Thank you for the update
We have alredy JIRA Id for improvement and tracking it under NC-10222.
But, that only explains half the issue. Time zones changing on an XG that is in a different time zone, not GMT.
Hi rfcat_vk ,
I have already asked for the detail steps.
no, I haven't done either. This issue only arose after either MR6 or MR7 was released regarding time and time zone.
I have the same issue with BIOS and time zone on a brand new build mr7 that was upgraded to v17b.
In reply to Rodrigo Pereira:
You can find all the details here
Thank you for the reported one, we have already JIRA ID for the same NC-21762 and it is resolved in SFOS 17 Beta-2.
You can set the timezone from the UI, to resolve the issue.
I have set the time in the UI, but it does not have any affect on the report generation times. Looking forward to the fix.
Have you applied timezone as well!
Yes., I have.
I just upgraded and am noticing several bugs, and this is the first time I have actually run into issues after an upgrade.
1) updating some rules to not log requires restart to apply
2) On IPv4 Lease under Network, I no longer see all my ip's. I am not sure what kind of logic, but where I normally have around 20 ip's in use I see 4-5. I know my other devices are connected, but they no longer register. In fact, I rebooted about 30 min ago and I only see 2 ip's - not even the 2 computers I am using at this moment
If others have been seeing a similar behavior, please let me know. This is not enough to rollback yet...
In reply to GaryW:
from my experience the addresses only show once the devices ask for a new IP lease, not saying good or bad, just a pain when trying to see whether the XG is working correctly.
Thank you for the update.
Need one more favor, Please restart the tomcat service.