This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Client-Isolation across Accesspoints?

Hello, 

 

we are using 9 Sophos Access-Points accross our company. For the Main-Wifi-Network the Client isolation is disabled. 

However, we are facing the issue, that Clients that are connected to DIFFERENT AccessPoints can't access each other. 
If both Clients are connected to the same AccessPoint, everything works fine. 

(When connected to different accesspoints, another client being connected (wired) can access both, and both can access the

wired client) 

Seems to be some "Client-Isolation", but only when connected to different AccessPoints? 

Any Idea, which configuration setting to check? 

 

(UTM 9.510-5 )



This thread was automatically locked due to age.
Parents
  • Good afternoon,

     

    Same happens to our environment.

    Running Sophos XG 18.0.1 MR-1-Build396 and using AP55 and APX320.

    The workaround doesn't work in our case (enabling/disabling the Client Isolation.

    WORSE thing is we also lost access from LAN to WiFi!

Reply
  • Good afternoon,

     

    Same happens to our environment.

    Running Sophos XG 18.0.1 MR-1-Build396 and using AP55 and APX320.

    The workaround doesn't work in our case (enabling/disabling the Client Isolation.

    WORSE thing is we also lost access from LAN to WiFi!

Children
No Data