Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 27 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 36023 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing to internal network doesn't work

Peter Cosworth

Hi,

 

i set up a PPTP VPN by following this guide: https://community.sophos.com/kb/en-us/116036

The VPN connection works. However, i can't reach the local network, neither via RDP, ping or whatever.

A traceroute from an internal server to the vpn client stops at the gateway. Same happens from the client.

The firewall log shows that the rule is executed (green, when trying from both sites) but it doesn't seem to get through.

I also deactivated the local firewall but the issue is still the same.

 

Any ideas?



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to BAlfson

    Unfortunately not :(

     

    Devices in the LAN must have the IP of "Internal (Address)" as their default gateway.

    --> All devices use the utm as default gateway

    Never connect two NICs into the same, physical Ethernet segment unless bridging or creating a LAG.

    --> This isn't the case

    When adding an interface, don't forget the Masquerading rule for the new network behind the UTM.

    --> Done, no effect

Children
No Data
Unfiltered HTML