Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 14364 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure Site to Site between UTM9 to Checkpoint 600

HagayCohen

hi all,

i'm trying to configure site to site VPN between UTM9 and Checkpoint 600.

if someone was able to do it and it work for him?

I will be glad to know if it works and how to configure this to work.

regards,

Hagay



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Hagay, and welcome to the UTM Community!

    Perhaps you could show us the IPsec log lines from a single connection attempt?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi bob,

    thanks for the replay but I manage to fix the issue.

    Regards,

    Hagay

  • 0 in reply to HagayCohen

    Hello there,

    we are facing the same issue, could you let me know how you solved that?

    Thanks in advance, Marcus

  • 0 in reply to Marcus Jocham

    in SOPHOS UTM9 Site 2 Site - IPsec you need to configure first Remote Gateway.

    the Remote network should be the lan in your remote site.

     

    then in Connections you create the IPsec connection

    Remote Gateway - you configure before

    Local Interface - the local LAN where the UTM 9 installed

    Policy - CPEncryption

    local networks - the local lan where Sophos installed.

    and check box for automatic firewall rules.

     

    on the checkpoint side:

    edit VPN Site, configure IP Address

    don't checkbox the Behind Static NAT

    configure the Pre-Shared Secret the same that you configure in the UTM 9

    under remote site encryption domain select - define remote network topology manually and create the remote Internal network IP where the UTM 9

    next under encryption do this:

    next under Advanced do this:

     

    that's it.

    it works for me.

     

    regards,

    Hagay

Reply
  • 0 in reply to Marcus Jocham

    in SOPHOS UTM9 Site 2 Site - IPsec you need to configure first Remote Gateway.

    the Remote network should be the lan in your remote site.

     

    then in Connections you create the IPsec connection

    Remote Gateway - you configure before

    Local Interface - the local LAN where the UTM 9 installed

    Policy - CPEncryption

    local networks - the local lan where Sophos installed.

    and check box for automatic firewall rules.

     

    on the checkpoint side:

    edit VPN Site, configure IP Address

    don't checkbox the Behind Static NAT

    configure the Pre-Shared Secret the same that you configure in the UTM 9

    under remote site encryption domain select - define remote network topology manually and create the remote Internal network IP where the UTM 9

    next under encryption do this:

    next under Advanced do this:

     

    that's it.

    it works for me.

     

    regards,

    Hagay

Children
No Data
Unfiltered HTML