Hi, and welcome to the UTM Community!
Rather than disable UDP flood protection for everything, check the Intrusion Prevention log to see what Exception(s) you need to add.
Cheers - Bob
Hi, and welcome to the UTM Community!
Rather than disable UDP flood protection for everything, check the Intrusion Prevention log to see what Exception(s) you need to add.
Cheers - Bob
We have had the same problem in our company for about 4 weeks.
Two locations Site to Site VPN:
Location 1: SG135, 500/500 Mbit, FW: 9.605-1
Location 2: SG125, 100/30 Mbit FW: 9.605-1
Since the last firmware update the SitetoSite VPN is extremely slow. I can only get a speed of exactly 780 KB/s.
Before the update we were able to use the full bandwidth.
Both tunnels have already been deleted, restarted the Firewall´s and tunnels newly set up. No improvement.
IPS is not used at either site and MTU support is also active.
Any ideas?
Thanks